Engine Builders

StrikeEngine – Links to engine builders in theUK and USA. Engine building services for competition/race engines as well as high performance road engines. Includes engine builders specialising in Honda, Nissan, Ford, Vauxhall/Opel, Chevy as well as NASCAR, BTCC and Club Racing.

see also:
tuners – european cars
tuners – japanese cars
clutch & flywheel
forged piston manufacturers
engine valve manufacturers
performance cam shaft manufacturers
con rod manufacturers
cylinder head services
crankshaft manufacturers
rolling roads uk

Engine Builders UK – Motorsport

Advanced Engine Research
Brunswick Automotive
Connaught Competition Engines
Engine Developments
HT Racing
Ilmor Engineering
John Wilcox Race Engines
Julian Godfrey
Minister Power
Mountune
Neil Brown Engineering
Nicolson Mclaren
Phil Jones Engine Developments
Ric Wood Motorsport
Zytek

Road and Race Engine Builders

APTuning
Clifford Cox Engineering
Collins Performance Engineering
DMC Engines
DTM Power
Dunnell Engines
Gosnays Engineering
HKS Europe
Horsham Developments
Huddart Engines
Impulse Developments
International Engine Services
JE Developments
JE Engineering
Mardi Gras Motorsport
Prima Racing
QED Motorsport
Radco Engines
RIPS
SBD Motorsport
Scholar Engines
Swindon Race Engines

Classic Car Engine Builders

Crosthwaite and Gardiner
Geoff Richardson

Engine Builders -USA

Arrow Racing
Bill Mitchell Hard Core Products
Drag Cartel
Ed Pink Racing Engines (Van Nuys, California)
Fischer Engineering (Denver, NC)
Golden Eagle Manufacturing (San Dimas, CA)
Laskey Racing Anaheim, CA
MazWorx
RAW Performance

Engine Builders Japan

Tomei

Japanese Specialist

Comptech

Race Engine Builders

Advanced Engine Research
Established since 1997, AER are designers and builders of award winning
race engine solutions that are leading the way in the motor sports industry.

Brunswick Automotive
At Brunswick Automotive we have been building race winning engines for well over a decade, our workshop has a dedicated engine building area where strict standards of cleanliness are observed at all time. We offer in house gas flowing and cylinder head refacing and are able to supply products from both Piper & Kent Cams, we can also supply, install and map most popular engine management systems on the market today including OMEX, Motec and EFI. At the same time we have definately not forgotten the art of carburettor tuning and maintain a number of succesful historic racing engines. As a result we are able to offer an engine building service to meet the needs of all the various spheres of motorsport whether the requirement is for an engine to last a 24 hour race or simply to extract a little more power for enjoyable track day use. In recent years we have had considerable experience with the following engines, but are always prepared to take on a new challenge:

Alfa Romeo:
8V Boxer – 135bhp Production specification & “full race” 160bhp 1500cc engine
16V Boxer – 155bhp Production specification & “full race” 240bhp 1800cc engines on carbs or management.
24V V6 – 250bhp Production specification & 300bhp modified race engine on Motec
“Nord” 2.0 – 160bhp race/trackday engine
2.0 Twinspark – 220bhp Endurance/24 Hour race engines, 250bhp “full race” engine
BMW:
M12 – 185bhp race engine for “Youngtimer” Trophy 2002Ti
BMC:
“A” Series – Mini Se7en & Miglia race engines
“B” Series – BCV8 series and FIA Historic MGB engines
Ford:
CVH – Group 1 Touring car engine
Crossflow – Classic Clubmans race engine
351 “Windsor” V8 – 350bhp modified road engine
Peugeot:
1.9 GTi race engine
Mi16 race engine
306 S16 trackday engine
Rover:
V8 for BCV8 series MGB V8
“K” Series 240bhp “full race” engine for British GT Lotus Elise
Subaru:
EJ20 Sti engine for fast road/trackday Impreza

Connaught Competition Engines
Established in February 1985, Newington based Connaught Competition Engines has built up an enviable track record for it engines within motorsport. Proprietor Phil Price graduated with an IMech Tech from a tool making apprenticeship with the Ministry of Defence and worked for six years with Minister Racing Engines before setting up on his own.

Danielson Engineering, Technologies, Magny Cours, France
Danielson Engineering specialises in researching, designing and manufacturing prototype engines, from petrol four-stroke single cylinder engines or diesel multi-cylinder engines for the car industry. It is able to design and manufacture everything in-house and can create functional engines in less than four months for reasonable prices. To date it has desiglled more than 40 different types of engines with tests and development on the test bench The company is structured to bring a total offer to Industrialists who wish to realise, within a short time, technically ambitious projects or prototype parts

Engine Developments
Engine Developments has been in the business of race engine design, development and maintenance for over 20 years. The company has grown from a small engineering firm to its current status as one of the principal suppliers of race engine technology and support to the motorsport industry.

Horsham Developments
Nissan engine building specialist focusing on the SR20DE and SR20DET

HT Racing
HT Racing who specialise in the building and tuning of the following 4 cylinder Ford engines;

BD series

Lotus twin cam

Zetec E

Pinto

X/Flow

CVH

RS2000 16v

Ilmor Engineering
Ilmor Inc’s founding as a race support company has provided us with a culture that inherently understands all of the aspects of high performance engines. Engines supported by Ilmor have won in excess of 160 Indy Car races including 12 Indy 500 wins and 9 Indy Car driver championships.

Inspection Optics Ltd, Frome, Somerset , UK 
Rigid I flexible endoscopes, cold li1. enabling internal inspection of engines, gearboxes, components and framework Diameter from 1 Omm down to I mm diameter and Insertion tube lengths up to three metres. Use by eye or attached to a colour video camera I monitor, allowing group viewing and problem solving Colour chip at the tip video endoscopes available with four way tip articulation diameters of 6 and 8mm. Insertion tube lengths up to six metres. Supplied complete with LCD screen, card capture and USB output to computer. All systems lightweight and battery operable

John Wilcox Race Engines
Wilcox Race Engines specialise in engines and the design and manufacturing of engine components, because of this we are able to dedicate our facilities entirely to the building, testing and development of high performance race engines.

 

Engine Builders - Photo, Julian Godfrey Duratec

Engine Builders - Photo, Julian Godfrey Duratec

Julian Godfrey
TOMMY GRAHAM (IRELAND) – 2009 Latest Spec Cosworth YB Rallycross Engine & Preparation Work for New Fiesta. Irish & UK Rallycross Championship.

BRUNO RAMOS (PORTUGAL) – New WRC YB Cosworth Engine – After Winning 2008 Championship. We now have Fully Converted Expofor’s Group A Engine to High Compression WRC Spec.

GEORGE TRACEY (IRELAND) - Rebuilt Citroen Xsara – Complete Rebuild of the Ex. Kenneth Hansen Xsara.

JOS KUYPERS (NETHERLANDS) - 2009 latest spec Cosworth YB Rallycross Engine – Dutch & European Rallycross Championship.

DERMOT CARNEGIE (IRELAND) – Alfa Engine – Rebuilding of an Alfa Guillietta Engine for Historic Rallying.

STEVE HIL (ENGLAND) – 2 New EVO 9 Engines – For his Latest Spec EVO 9 New Car.

JULIAN GODFREY (ENGLAND) New Modified Fiesta – 1600cc Duratec Engine for UK / Irish / European Rallycross Championships. 230Bhp & 10,000 RPM.

Mecachrome, France
Mecachrome is a world leading high precision engineering group with 30 years experience in supplying a wide range of high performance powertrain solutions and individual components. Its engine R&D centre and manufacturing plants enable Mecachrome to offer from individual component optimisation studies up to complete engine / gearbox designs and manufactures with the use of self -developed innovative materials and coatings. Mecachrome’s industrial expertise in machining solutions contributes to proposing various race winning chassis and engine components ballast uprights, cylinder heads. blocks, pistons. crankshafts, valve train components. Mecachrome’s quality and performance in motor racing (F1, GP2, LMP1, Moto GP. NASCAR) alongside It’S flexibility and industrial knowledge

Minister Power
It is Minister-Power’s policy to build the engines to a high standard, using quality engineering practices, components and assembly operations, and after sales assistance to suit the customer.

Mountune
Mountune Racing is renowned for the design, development and production of championship-level competition engines. Since 1979 we have supplied road, rally and track race engines to many of the world’s leading motorsport teams, including Ford, Formula Palmer Audi, Ascari, Petronas/Proton, Peugeot and Hyundai.

Neil Brown Engineering
Team Dynamics Honda Integra K Series builder (BTCC)

Nicolson Mclaren
Nicholson McLaren rebuild, develop and sell Cosworth engines

Phil Jones Engine Developments
We were founded 21 years ago and have served the Motorsport industry ever since. Our Expertise is in Engines, Gearboxes and Differentials.

Ric Wood Motorsport
Race Engines are what it’s all about for us. We build race engines and we race them. It’s in our blood.

We have invested heavily in state of the art computer controlled equipment and software to build the best possible engines for racing or fast road applications.

The Sections below give you some insight in to our engineering philosophy behind our engines and some of the great engines we have built.

If you are a serious racer, a track day or fast road enthusiast you’ll find plenty of interest here.

Call us for more details on any of our engine services.

Swindon Race Engines
Swindon Racing Engines design, develop, manufacture, assemble, and support race winning engines.

Zytek
As a major international specialist in performance engines, Zytek offers standard, tailored and bespoke solutions in a range of categories.


Road and Race Engines

 

Engine Builder Directory - Photo APTuning EVO

Engine Builder Directory - Photo APTuning EVO

APTuning
EVO engine building specialist.

Clifford Cox Engineering
Here at Clifford Cox we are able to build and rebuild most engines and cylinder heads either to standard specification or modified to suit your budget.

Collins Performance Engineering
Collins Performance Engineering have established a name for themselves in the Ford world by being at the forefront of Ford Sierra Cosworth tuning since the beginning back in 1987. Collins Performance offer a fullEngineBuilding service. With our engine Dyno facility and 4 wheel drive rolling road we can tune an engine to perfection. Give us a call now to discuss your ford tuning or other engine tuning requirements

Collins Performance Products
Our own brand of performance enhancing products including: engine mounts, dump valves, boost gauges and wastegate actuators.

ECU Remapping

Collins produce the highly regarded ’Powerchip’ along with other electronic upgrades (also known as chipping or ECU Remapping), setting new standards in engine-efficiency and performance for petrol and diesel engines.

Ford Focus ST & New RS mk2

If you own aFord Focus ST or a new Focus RS mk2, check out our large range of Ford Focus ST & RS tuning parts along with our selection of Ford Focus ST & RS Performance Exhausts

DMC Engines
At DMC Engines, we specialise in rebuilding and modifying car engines both for motorsport and for restoration projects.

DTM Power
We are able to undertake development projects to increase the torque and power of any type of Race Engine, or high performance road engine, Ford to Ferrari, Pinto to DFV.

Dunnell Engines
In buying a Dunnell Engine or component you can be assured of the highest quality of workmanship which has resulted in the design and production of world-beating racing engines for both National and International championships over a period of 35 years.
(Ford Zetec & Duratec)

 

Engine Builder Directory - Photo, HKS Engine For Nissan GTR

Engine Builder Directory - Photo, HKS Engine For Nissan GTR

HKS Europe
HKS offer a range of road car engines to meet any customer’s requirements. These can be anything, from a simple rebuild and power increase to 350bhp, to a comprehensive racing package producing in excess for 600bhp.

Huddart Engines
For over 35 years, Huddart engines have been offering probably the best and most complete service for the American engine owner.

Impulse Developments
Company History: Impulse Developments have been trading for 20 years and in that time have built up a reputation for the highest quality machining and engine preperation in the NW . We deal with customers from all over the UK.

Products & Services Offered: Cylinder head specialists and engine building from standard engine to competition , cylinder heads reconditioned to gas flowed heads for all forms of motorsport.Dynamic engine balancing, supplier of all engine parts from standard to competition parts ie steel cranks and con rods, forged pistons,heavy duty bearings , hard to find parts etc

International Engine Services
IES designed the Nissan BTCC engine that was dominant in the class from 1997 to 2000, winning the manufacturers title in 1998 & 1999. Currently they prepare the Nissan Touring Car engines for the European Touring Car series on behalf of the factory.

JE Developments
We have specialised in building and developing Rover V8 engines for more than 25 years.

JE Engineering
JE Engineering the World-leading creators of performance enhancements for Land Rover Vehicles and Rover V8 Engines.

Mardi Gras Motorsport
Honda B Series specialist engine builder.

Prima Racing
We can re-build or modifying any Citroën engine to your specific requirements

QED Motorsport
QED Motorsport is a longstanding supplier of outstanding, performance engines for clubman level motorsport and beyond.

Our heritage is with the Lotus-Ford Twincam, which we have been working with for over 30 years, but over time we have selectively added other engines to our stable.

Our first involvement with the Lotus 900 Series engines (907, 911, and 912) followed our developments with the Lotus Sunbeam for hillclimbing. We now offer a comprehensive range of original Lotus and aftermarket parts.

Motorsport also brought us to the Vauxhall/Opel XE which at the time was GM’s mainstay production engine and has now become a familiar sight in many motorsport applications.

It’s successor the Vauxhall/Opel Ecotec is a very similar design and has similar potential.

Radco Engines
The business has been established for 7 years and specialises in engine building, performance tuning and modification of classic and historic engines for both cars and motorcycles. There is a fully equipped workshop with 95% of machining work carried out in-house.

RIPS
You have come to the right place if you want a custom-built RB engine or top quality custom fabricated parts for your Nissan RB powered road/race car.

In New Zealand, R.I.P.S currently have the fastest street Skyline, fastest Japanese street car, fastest Pro Import on petrol, the worlds fastest 240z and the worlds fastest RB30

Plus, the owner Robbie Ward holds more than three times as many import drag records than any other driver in NZ.

R.I.P.S specialise in custom making things you can’t buy ‘off the shelf’ and all of our products are made to an extremely high standard.

R.I.P.S build RB series engines from mild to wild with the RB30, 2WD or 4WD, being our specialty.

R.I.P.S ship all over the world and our policy is ‘quality and customer satisfaction come first’

SBD Motorsport
We specialise in designing and manufacturing of engine components and management systems for the Vauxhall, Ford Duratec & Suzuki hayabusa engines for motorsport use.

Scholar Engines
Scholar Engines were formed in September 1968 to produce modified performance road, race, rally and various competition engines.

Swindon Race Engines
Swindon Racing Engines design, develop, manufacture, assemble, and support race winning engines.


Classic Car Engine Builders

Crosthwaite and Gardiner
Specialists in the Manufacture of Race Engines, Gearboxes and Spare Parts for the Historic Race Car Industry

Geoff Richardson
We supply the very best Cosworth historic engines for every conceivable application. We have an experienced, dedicated, conscientious team here in Kimbolton ready to help, supply, support and advise you, and above all get you winning!


Engine Builders -USA

Arrow Racing
Dodge Viper engine building specialist

Bill Mitchell Hard Core Products
Ford and Chevy Big Block/Small Block. Site contains specs and prices.

Drag Cartel
Honda K Series Specialist

Ed Pink Racing Engines (Van Nuys, California)
Ed Pink Racing Engines (EPRE) is one of America’s premier auto racing engine building, testing design and development facilities

Fischer Engineering
Throughout our rich history, Fischer engines have won races, pole positions and national championships in NASCAR Nextel Cup, NASCAR Grand National and Elite Divisions, NASCAR Craftsman Truck Series, the ARCA RE/MAX Series, ASA, IMSA GTO and SCCA Trans-Am.

Golden Eagle Manufacturing (San Dimas, CA)
For Over 20 years, Golden Eagle Manufacturing has been exemplifying standards in the machining industry. A commitment to quality and detailed craftsmanship comes from every product that Golden Eagle manufactures. From military hardware with military spec. tolerances in aerospace or government defense related uses, to our new passion for the sport compact market, Golden Eagle Manufacturing has proven itself to be a leader in anything it sets out to do.

Laskey Racing Anaheim, CA
Honda engine builder and drag car builder

MazWorx
httpvh://www.youtube.com/watch?v=U9HJYAQ6-s8&feature=player_embedded
SR20DE, SR20DET, SR20VE and SR20VET turbo specialist. Excellent website listing a hug range of products both for the VE and DE motors. Part including VE head DE block conversion kits for the S13 and S14 200SX chassis. Valve springs and retainers for the VE, FWD 5 speed to 6 speed gearbox conversion, intake manifold spacers for the S14/S15 to allow top feed injectors, complete short blocks with standard capacity up to 2.34litres they even manufacture their own torque plate for accurate cylinder boring of the SR20. They also offer race car and drift car builds including space frame construction

Mazworx founded in 2004, has been on the cutting edge of performance, product research and development, and fabrication. We have dedicated our expertise over the years from racing and product development to create the best performance parts on market. Although we are known for our world’s most powerful Nissan SR20 powerplants, our performance product knowledge does not end there. From building full chassis race cars, cnc machine product development, full engine building capabilites, custom fabrication product development, we are your one stop go-fast facility.

Be sure to check out our current projects section to see what endless capabilities we have.

RAW Performance
If you are looking for Ron@Axis, you are in the right place. RAW Performance, formerly Axis Power Tuning – same great products, just a new name.

This is your one stop for Full Service Subaru Performance. We offer a wide array of parts & services ranging from a clutch replacement to a full engine & drive-train swaps.

Our specialty: Fully Built Subaru Race Engines. We have, over the years, built countless engines for customers in every region of the world.


Engine Builders Japan

Tomei
The Grandmasters of SR20 Engines!
We have been building and tuning these engines since the day it was 1st released from Nissan. So with nearly 2 decades of experience, you can rest assured our complete Genesis engine is worth every bit of your time.

Japanese Specialist

Comptech
Our years of race winning experience in all types of endurance and road racing has made COMPTECH one of the premier road race engine specialist in the country.  We now develop, build, and maintain engines for factory teams such as Mazda, Acura and other top performing teams.

In 2007, COMPTECH engines powered Tri-point Mazda’s 3 car team to the World Cup Manufacturer’s Championship as well as the over-all championship.

 

Live Streams/Feeds (may take a few seconds to open when feeds are updating)

Leave a Reply

  

  

  


− 5 = four

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>